Martin Audio F10 User Manual

Martin Audio – Blackline F8, F10, S12CONTENTS (ENGLISH) Page No1 INTRODUCTION 22 UNPACKING 23 F8, F10 AND S12 OVERVIEW 23.1 F8 Full-range system 33.

F10 with S12/S15 RCR = 1:1(Fig 9)9 WARRANTYMartin Audio Blackiline Series products are warranted againstmanufacturing defects in materials or craftsm

10 TECHNICAL SPECIFICATIONSF8TYPE Ultra-compact, two way passive FREQUENCY RESPONSE (1) 70Hz-20kHz ± 3dBLOW FREQUENCY LIMIT 55Hz (-10dB)DRIVERS 1 x 8&

F10TYPE Compact, two way passive FREQUENCY RESPONSE (1) 65Hz-20kHz ± 3dBLOW FREQUENCY LIMIT 56Hz (-10dB)DRIVERS 1 x 10" (250mm)/2 1/2"(63mm)

S12TYPE Compact sub-bass system FREQUENCY RESPONSE (1) 52Hz-150Hz ± 3dBLOW FREQUENCY LIMIT 43Hz (-10dB)DRIVER 1 x 12" (300mm)/3" (75mm) voic

Blackline F8/F10/S12Century Point, Halifax Road, Cressex Business Park, High Wycombe, Buckinghamshire HP12 3SL, England. Telephone: +44 (0)1494 5353

MARTIN AUDIOLONDONThe Martin ExperienceENGLISHBlackline F8/F10/S12User’s GuideAll material © 2007. Martin Audio Ltd. Subject to change without notice.

1 INTRODUCTIONThank you for purchasing a Martin Audio Blackline Series system. TheBlackline Series is a range of portable loudspeaker enclosures desi

3.1 F8 Full-range system(Fig 1)The F8 is a versatile, 2-way passive system designed for applicationswhere high output is required from an ultra-compac

multi-angle enclosure to be used in either its vertical or horizontalorientation. To rotate the horn for horizontal use, remove the grille (see 3.4bel

4 SAFETY FIRSTIt is important that loudspeaker systems are used in a safe manner. Pleasetake some time to review the following points concerning safe

compatible Martin Audio wall Brackets. The F8, F10 enclosures are fittedinternally with steel corner reinforcement brackets to ensure that eachcabinet

6 CONNECTIONSEach connector panel has two Neutrik Speakon connectors wired in parallelwith each other. The second connector allows use of a short lin

8.1 Passive systemsF8/F10 Full-range(Fig 5)Because the F8 and F10 are passive systems embodying correct acousticdesign principles, they can be used wi

F10 with S12/S15 RCR = 1:1 (Fig 7)8.2 Bi-amped systemsThe switch at the back of the sub-bass enclosure should be switched to"active".F8 with